AP860 Gen 4 SSD uses NAND flash and a new-generation Maxio controller, with a sequential read speed of up to 7100 MB/s and a sequential write speed of 6700 MB/s. Without an external DARM, the built-in HMB can perform the function of the traditional independent DRAM.
This product adopts a single-sided PCB design, which is thinner and slimmer. To be compatible with mainstream PCs, the AP860 SSD can also be adapted to all ultra-thin laptops. In addition, it also has a variety of large capacities from 512 GB to 2 TB, which greatly meets the various storage needs of different consumers. The BIWIN AP860 SSD effectively speeds up the system and easily handles long-term and high-load reading and writing scenarios.
1. Static and dynamic wear leveling algorithms
2. Garbage collection and TRIM
3. Supports dynamic power management
4. Supports TRIM, NCQ, and S.M.A.R.T.
5. Supports Modern Standby
| Interface | PCIe Gen4 x4 |
|---|---|
| Flash Type | 3D TLC |
| Channel | 4 |
| Max. Sequential Read / Write | 7100 / 6600 MB/s |
| Power Consumption | 3.1 W |
| Thermal Sensor | Support |
| External Cache | / |
| Firmware Backup | Support |
| TRIM | Support |
| ATA Encryption | Support |
| S.M.A.R.T Monitoring | Optional |
| AES 256-Bit | / |
| Power-off Protection | / |
| Quick Erase | / |
| Physical Destruction | / |
| Working Temperature | 0 ℃ to 70 ℃ |
| Dimensions | 22.0 x 80.0 x 2.3 mm |
| Environment Temperature | -40 ℃ to 85 ℃ |
| Capacity | 512 GB /1 TB /2 TB |
| Product Model | NVMe M.2 2280 SSD |
